• Needle Valves Manufacturer in Mumbai
  • Female Connector Manufacturer in Mumbai
  • 37 Degree Flare Fitting Manufacturer in Mumbai

Specializing in the Production of Tube fittings, Pipe fittings and Precision Turned Components

DIN 2353 Fittings

EXPAND” high pressure steel fittings are manufactured to DIN 2353 specification and ISO 8434 – 1 for ease of Interchangeability. These fittings are available for different pressure rating from 100Bar to 630Bar

Quality test are carried such a high pressure, impulse, vibration, vacuum, temperature, pull out and burst pressure; so that maximum safety and reliability is ensured from tube fittings.


List Of DIN 2353 Fittings

Type Flare less Bite Type (Single Ferrule) Weld Nipple Type
Series LL (Very Light), L (Light), S (Heavy)
Size 4mm to 42mm, 1/8”OD to 2”OD, 1/8”NB to 2”NB
Material Steel, Stainless Steel, Brass (From extruded bar or forging)
Pressure Ranging from 100Bar to 630Bar depending on type and size
Material Steel, Stainless Steel, Brass (From extruded bar or forging)
Standard DIN 2353 / ISO 8434 - 1
Surface Treatment- Top Bottom Plate Steels

List Of DIN 2353 Fittings

EXPAND” Single Ferrule Fittings / Din 2353 Fittings is a three piece design consisting of a body portion, a coupling nut and a ferrule. During the assembly the nut is progressively tightened causing hardened ferrule to slide along the inner conical seat of the body and grip the tube. Tightening the nut, ring deforms due to 24 degree cone of fittings and bites into the steel tube, producing deep cut on the tube. The cut is visible on the outer diameter of the tube. This cut on the tube acts as metallic interlock and makes the joint leak proof at high pressure and under vibration

ASSEMBLY

Before Assembly After Assembly

RECOMMENDATION

Use Seamless tube as per Standard ST37.4 or DIN 1630 – 2391 for proper biting on tube.